The HPJ has a 49” working surface with 2 zones. A color touchscreen is used to program parts and for program storage! Horizontal and Vertical Drilling is... More »
The table top is V shaped to allow machining of two parts at one time. All referencing is done off of one edge for accurate joints. The computer... More »
The first cut is the final cut, improving the results of subsequent machining Motorized tilting of saw unit and raising/lowering of saw blade is... More »
The first cut is the final cut; reduces assembly time, as parts fit easier–reducing material cost Motorized tilting of saw unit and raising/lowering... More »
Eye-level, programmable, 12" color, touch-screen controller capable of storing up to 600 programs 90% of all settings accessible from main... More »
• Standard Electrics NEMA 12 Enclosure with main disconnect switch and over-current protection, 230/460-3-60, 115V control circuits; • Variable... More »
The Black Bros. Panel Cleaner ensures that the substrate is free on both sides of any dust or embedded chips prior to gluing or coating. This helps... More »
Top & Bottom Adhesive Spreader Includes: • Standard Electrics NEMA 12 Enclosure with main disconnect switch and over-current protection, 230/460-3-60,... More »
PC-16 program control with color matrix LCD screen and 8 MB RAM Integrated electronic line control system for increased reliability Universal... More »
Standard machine has one open space to add a buffing or scraping unit 30 ft/min feed speed 50mm panel thickness (2") Automatic height adjustment with... More »
The KDN 300 series come equipped with gluing unit, trimming unit with two trimming motors, flush trimming unit equipped with two milling motors, a... More »
Butfering 37" Wide Belt Sander is standard with combination head with height adjustable steel contact roller and two sanding inserts for the sanding... More »
Two head wide belt with a Contact Roller / Combination Head configuration for calibrating sanding and basic veneer sanding. Working width of 43”. Contact... More »
Accurate parallelogram design allows front and rear table to travel in the same arc as the cutting circle. This maintains close and uniform clearance... More »
Model D45AX Fixed Head Double Mitre Saw • Standard machine equipped as follows: • 10" Blade Capacity standard, 12" & 14" Blade Capacity available; • 1... More »
• Table Base - Made of iron castings, precision machined and ground with milled slots to guide fences, saw head pivots up to 45˚ each way... More »
The Dantherm Filtration high-efficiency Cyclone is an industry standard that arrives primed, painted and ready to collect virtually all types of industrial... More »
Dantherm Filtration Inc now offers the S-Series dust collectors. The S-Series includes 1HP, 2HP, 5HP and 7.5HP motors with a 500 CFM to 4500 CFM range.... More »
• 48” x 96” • Height 36” • Weight 1200 lbs • CFM 4800 CFM Afterfilters • Sound level 82 decibels • Motor 5HP, 3PH, 230/460/575 volt • 4 cartridge... More »
Diehl SL-30 Straitght Line Rip Saw features: Fixed Arbor, Fixed Feed Speed At 60 FPM, Maximum Stock Thickness is 2 1/2", Blade Diameter 14" or... More »
Diehl SL-65 Adjustable Arbor, Variable Feed Speed 70-200 FPM, Maximum Stock Thickness is 4 1/4", Blade Diameter 14",16" or 18", Maximum Glue Line... More »
Model SE-1 is complete with pneumatic clamps, magnetic starter, and a carbide tipped dovetail cutter. It's also equipped with a four-sided template that... More »
Full-color graphics controller with 15" LCD flat panel monitor allows operator to follow cutting patterns visually Electronic program fence equipped with... More »
6’ Panel Clamp Package Includes: (8) #202-32-H-R Clamps, 32” Clamps with a 2.5” high jaw OR (8) #202-40-H-R Clamps, 40” Clamps with a 2.5” high... More »
SIGMA CONTROL automatically regulates and monitors the compressor. It is based on a robust industrial computer with real time operating system and update... More »
Machine base is made of cast iron Hardened chrome infeed table Heavy duty feeding system Machine capacity (finished) 125mm x 230mm Minimum working... More »
Machine base is made of cast iron Hardened chrome infeed table Heavy duty feeding system Machine capacity (finished) 150mm x 230mm Minimum working... More »
Oliver 4015 10" Tablesaw Features include: • Large Precision-Ground Table • Left Tilting 10" Blade • 5/8" Arbor • Optimus square tube fence... More »
Oliver Professional 12" Tablesaw Model 4035 Features Include: • Large Precision-Ground Table • Left Tilting 12" Blade • 5/8" or 1” Arbor • Optimus... More »
Oliver Professional 16" Tablesaw Model 4060 Features Include: • Large Precision-Ground Table • Right Tilting 16" or 14”Blade • 1” Arbor • Optimus... More »
Precision Ground Table For Perfect Jointing 84" Long Bed 45" Fence Solid Cast Iron Base For Vibration- Free Operation Wide Base For Stability... More »
Oliver 4455 - 22" Planer Features Include: • Two Feed Speeds: 20/ 30 FPM • Segmented Infeed Roller and Sectional Chip Breaker • Driven Outfeed... More »
Oliver 4655 24" Bandsaw Features Include: • Balanced cast-iron wheels with rubber tires • Magnetic switch • Heavy gauge steel frame • Large, cast... More »
Oliver 4710 Stationary Table Shaper Features Include: • Reversible spindle • Solid cast iron base • Cast iron miter gauge with hold down clamp... More »
It is equipped with a mill spindle which allows cutting of indents of adjustable height and four types of indents with different pitches can be made. • ... More »
Fixed Table moving gantry CNC Router equipped with 1 (one) 7.5 KW (10 HP) router head with variable speeds from 1000 - 24000 RPM and with 8 position... More »
Reversing Switch 1" or 1-1/4" Spindle (Specify) 5 H.P., 3-Phase 220/440 Volt Motor Magnetic Controls Spindle Speeds 8600/6100 RPM, V-belt Driven... More »
Ritter R113 Mini Drill • 13-spindle manual line drill; Steel Gear driven spindles on 32mm centers: 10mm collets; Push buttom controls, 60” backfence... More »
Ritter R-246 includes Traveling back fence positioning with rear drill head carriage, extended back fence reference stops and supports for long panels,... More »
50" High x 50" Wide x 24" Deep Capacity (3) Pneumatic Clamping Pressure Bars 1800 PSI Maximum Pressure per Pressure Bar Rack and Pinion Beam... More »
Ritter Model R-525 Electronic Case Clamp • Single Side • Semi Automatic Clamp Cycle • (2) 2 HP Beam Drive Motors, TEFC • Horizontal/Vertical... More »
The Classic Clamp Carrier is our most versatile model. Sizes range from 20 to 80 sections with widths up to 16-1/2' (5M) wide. Most machines are equipped... More »
Univer Model 508 Power Feeder • Heavy duty • .7/1 HP • 220 volt/60/3phase • 3 wheel • 8 speed (10, 20, 25,28, 50, 56,62, 124) More »
Features: Variable speed control, cast iron machine base, ergonomic working height with adjustable arm rest THK bed rails and bearings, convenient... More »
New high rapid traverse and program speeds reduce processing time New high acceleration further reduces processing time and increases at-speed time... More »
Superior structural stability from plate steel weldment frames Maximum rigidity from meticulous design and construction of machining heads assures... More »
Robust 12 HP router motor • Error resistant, 14-position ride-along tool changer • Grooving saw with X- and Y-axes capability • LED pod positioning—... More »
Speed Nailer pneumatically presses a nail into back side of moulding for 1/12" to 6" frame width More »
Mortiser with 3HP, 9000 RPM spindle motor; 1HP oscillation motor. Maximum oscillation length -4"; Maximum depth- 3". Maximum diameter bit 7/8".... More »
Bacci tenoner set up for mitre door frames 4HP belt driven cutterhead 1 HHP Positioning motor 460V-3PH 2 tables capable of tilting up to 20 degrees Max... More »
Binks (used) polycoat poyester resin plural component spray set up with one gun -15:1 ratio; completely pneumatic. More »
Stationary profile trimming of lead edges on symmetrical postformed workpieces as well as radius trimming of thick PVC edgings Precision fence... More »
Used Brandt KD 84 Edgebander (1996)Automatic height adjustment of all work stations when upper pressure beam adjusted Equipped with digital height... More »
Magazine for strip and coil feeding; precuttter for 3mm PVC; (2) end trim motors; Top and Bottom flush trim with digital "Quick-set" system; Tilt... More »
Pro-Max 100 Clamp and nailing squatres, clamps and fastens a variety of cabinet door styles and sizes. Standard size capabilities: Min 7" W x 5-1/2"... More »
New(never used) Yr. mfg. 2005-5 HP motor; 80 gallon vertical tank; magnetic starter; Auto tank drain; Vibration mounts; 19cfm@125 psi; Low oil level... More »
Dayton 14" Bench type drill press has 1/2" chuck capacity with a two spindle attachment. spindles on 3" centers 1/4 capcity. 1/2 HP motor, air... More »
Delta 14" bandsaw with enclosed stand; 1-1/2HP motor, 6-1/4" cutting height, 93-1/2" blade length, rip fence. This machine is in excellent condition... More »
DMG 60CB Contour Edgebander (used) 2000 Features: • Electronic counter • Table mounted glue pot with 2100 kw heater and digital electronic... More »
DMG 62CT (used) 2000 Edge trimmer features • Welded steel base construction with phenolic table top • Upper & lower 0.7 HP 12,000-RPM motors with... More »
This Doucet return conveyor was originally set up on a Voorwood Shape and Sand machine. Receiving conveyor 24" x 48"; Return conveyor 24" x 15'0"... More »
The 0650 drill tub for face frames dual spindles on 1" centers More »
Golden West spray booth 18' wide x 8' high x 60" working depth.; 42" blower. 460V-3PH-3 HP. Booth has been dismantled. Duct from blower through roof... More »
Kufo Dust Collector(2006) 3 HP; 440 volt; 2400 CFM; Two upper filter bags; Two lover storage bags, Inlet 6" More »
Multiple rip saw with 75 HP main drive; 3HP feedmotor, 30-150 FPM, 24" arbor space, 3-1/2" max. thickness; 22" min. length. Machine will be sold as a... More »
Murphy Rodgers 2000 Dust Collector with Primary separator; Secondary filtration by filter bag section; 9" inlet, 5 HP, 460V-3PH motor, magnetic starter,... More »
18", Left Hand Cut off Saw. 7.5HP;220volt; 1 Phase motor. Table size 26-1/4" x 27-1/2". Table Height 32-3/4" More »
Pertici 1986 3-wheel power feeder with stand. More »
Professional thermoforming oven for heating and bending sold surface material. Useable space H=7-1/2", W=38" L=100"; 2 top and bottom heating elements... More »
Powermatic Spindle shaper (1999) has a heavy duty ground cast iron table. Spindle assembly is mounted to table bottom Two-speed reversible spindle... More »
Ritter R46 Double Row System drill features: • Top Drilling • (2) 23-Spindle Gear Driven Drill Heads • Requires (24) Right hand, (22) Left Hand • 10mm... More »
R 703 edge sander features a 2 HP drive motor; 4" x 132" belt size; 12" x 65" side tables - both tables tilt up to 45 degrees, 230V-3PH More »
Rockwell light duty shaper has 1/2" spindle, open stand. More »
Heavy Duty CNC Router, Table size: 52" x 98" with FANC O-M Control, 4 main spindles have Hitachi inverters, 7.5HP Roots vacuum blower, Head No. 1 - 12HP... More »
Tyler Band re-saw is in like new condition. 2-1/2" max band width, 36" wheels, 12" max cutting height, four powered vertical infeed rolls, feed works... More »
Wadkin Shaper features 1-1/4" spindle,; 10HP-460V-3PH.Year mfg. 1989 More »
