The Brandt KDF-660 C edgebander brings high technology at an affordable price. This machine is equipped with PC-16 program control and contour trimming.
PC-16 program control with color matrix LCD screen and 8 MB RAM
Integrated electronic line control system for increased reliability
Universal automatic magazine for strip and coil feeding
Joint trimming unit for pre-trimming the workpiece edge prior to processing
Quick-melt granulate glue application system with 12-minute heat-up time
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength
Double-motor end trimming unit with straight and chamfer capability
Fine trimming unit with digital "Quickset" system and tilt range of 0 - 25°
Contour trimming unit for profile corner trimming
Scraping unit for rigid PVC edges and buffing unit
Technical Specifications
| Edgeband Thickness | .4 - 12 mm |
|---|
| Coil cut off maximum | .8 x 45 mm; 3.0 x 45 mm (PVC) |
|---|
| Edgeband Height | 12 - 60 mm |
|---|
| Panel Length Minimum | 160 mm |
|---|
| Panel Width Minimum | 65 mm |
|---|
| Panel Thickness | 8 mm minimum; 55 mm maximum |
|---|
| Feed Speed | two speeds 14 m/min (46 FPM) and 11 m/min (36 FPM when using contour trimming unit |
|---|
| Feed Motor | 2.2 kw (3 HP) |
|---|
| Joint trimming Unit - two motors | 2.2 kw (3 HP each) |
|---|
| Pressure Section | First roller driven two rollers idle |
|---|
| End Trim Unit -HP | two motors .27 (1/3 HP each) |
|---|
| Fine Trimming Unit | .55 kw (3/4 HP each; tilting range 0-25 degrees |
|---|
| Profile Trimming unit - top and bottom | .3 kw (1/2 HP each two motors) |
|---|
| Power Required | 7 kw |
|---|
| Amperage | @ 230 - 50 amps;
@ 460 - 25 amps |
|---|
| Machine Length | 6240 mm |
|---|
| Machine Width | 1730 mm |
|---|
| Working Height | 900 mm |
|---|
| Machine Height | 1600 mm |
|---|
| Weight | 2600 kg |
|---|